 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| lcd lcd lcd lcd module module module module technical technical technical technical specification specification specification specification part no. : gs- g g 12864 63ffwj/r customer : customer approved approved checked prepared 2011.02.24 2011.02.24 2011.02.24 2011.02.24 2011.02.24 2011.02.24 2011.02.24 2011.02.24 ? 2011.02.24 2011.02.24 2011.02.24 2011.02.24 ? genda technology (shenzhen) ltd. address: friendship industrial building, 71 district , baoan, shenzhen, p.r.china. post code: 518101 tel 86-755-27865012 fax 86-755-27865217 e-mail: gme.43@gendalcd.com free datasheet http:///
model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 2 / 20 contents contents contents contents 1. record of revision 2. general specification 3. display content and mechanical characteristic 4 . module drawing 5 . block diagram 6 . application circuit 7. interface description 8. electrical characteristics 9. absolute maximum ratings 10 . electro-optical charac teristics 11 . reliability of lcd module 12 . ac characteristics 1 3 . commands table 14. lcd moudle quality standard 1 5 . handling precautions 1 6 . packing specifications free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 3 / 20 1. 1. 1. 1. record of revision d d d d ate ate ate ate ver. ver. ver. ver. d d d d escription escription escription escription page page page page design design design design by by by by 20 1 1 - 0 2 -2 4 00 first issue 20 20 20 20 lsx free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 4 / 20 2. 2. 2. 2. general specification 2.1 2.1 2.1 2.1 general specification please refer to: a . customer acceptance standard specifications lcd moudle quality standard b. customer acceptance standard specifications (ic- splc501c ) 2.2 2.2 2.2 2.2 this individual specification is prior to general specifications. 2.3 2.3 2.3 2.3 assemblies shall comply with rohs requirements. 3. 3. 3. 3. display content and mechanical characteristic item item item item standard standard standard standard value value value value unit unit unit unit number of dots 128*64 dots ---- module dimension 93.7 ( l ) * 52.4 ( w ) * 5.5 ( h ) mm view display area 70.7 ( l ) x 38.8 ( w ) mm dot size 0. 5 ( l ) x 0. 5 ( w ) mm dot pitch 0. 52 ( l ) x 0. 52 ( w ) mm operating temp -20 ~ 7 0 storage temp -30 ~ 8 0 driving method 1/ 65 duty 1/ 9 bias vop= 8.7 v viewing direction 6 o clock display mode f stn display type transflective / positive driver ic splc501c backlight white free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 5 / 20 4 . module drawing ?? ? led circuit diagram: 1*4=4pcs a--a ? 1 26 26 1 detail b ch0500-02+ct0500 a k free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 6 / 20 5. block diagram 6. application circuit free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 7 / 20 7. interface description no. no. no. no. symbol symbol symbol symbol f f f f unction unction unction unction 1 / cs chip select pin 2 /res t external reset pin 3 a0 select registers 4 /wr write signal 5 /rd read signal 6 d0 data bus 7 d1 8 d2 9 d3 10 d4 11 d5 12 d6 (scl) 13 d7 (si) 14 vdd power supply 15 vss ground 16 vout dc/dc voltage converter. 17 cap3 n dc/dc voltage converter 18 cap1 p 19 cap1 n 20 cap2 n 21 cap2 p 22 v 1 lcd driver supplies voltages 23 v 2 24 v 3 25 v 4 26 v 5 free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 8 / 20 8. electrical characteristics item symbol conditions standard value unit min typ max power supply voltage for lcm lcm lcm lcm vdd vss ta= +25 --- 3.3 -- v power supply for lcd lcd lcd lcd driving v0 vss ta= +25 8.5 8.7 8.9 v power supply voltage for led led led led va-vk ta= +25 -- -- -- v forward current for led led led led va-vk ta= +25 -- -- -- ma input voltage h level vih 0.8vdd vdd v input voltage l level vil vss 0.2vdd v output voltage h level voh ioh=-0.5ma 0.8vdd vdd v output voltage l level vol iol=-0.5ma vss 0.2vdd v 9. absolute maximum ratings characteristic characteristic characteristic characteristic symbol symbol symbol symbol value value value value unit unit unit unit p o wer supply voltage vdd -0.3to 7.0 v power supply voltage (vdd standard) v5,vout -12 to +0.3 v power supply voltage (vdd standard) v 1,v2,v3,v4 v5to+0.3v v operating temperature topr -20~70 c storage temperature tstr -30~80 c 10. electro-optical charac teristics duty= 1/65 ; bias= 1/9 item symbol measurement temperature min type max unit remark note operating voltage range (lcd) vop 25 0 c 8.5 8.7 8.9 v 2 vth vth1 25 0 c 0.7vdd --- vdd v 1 vth2 25 0 c vss ---- 0.3vdd v response time rise time tr 25 0 c ---- 200 ---- ms 2 fall time tf 25 0 c ---- 250 ---- contrast ratio cr 25 0 c 3 5 --- 3 viewing angle ? ( 6 0 clock ) 1 25 0 c -- 25 -- deg =0 4 2 25 0 c -- 35 -- =180 3 25 0 c -- 30 -- =90 4 25 0 c -- 30 -- =270 free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 9 / 20 note1:threshold volage:v th note2 operating voltage and frequency v op fr response time tr tf note4 viewing direction ? selective time fr loff lon tr 10% non selective time brightness driving wave ?? vop positive type 90% ?? tf time ?? non selective time t ?? positive mode negative mode 0 10 v th2 v th1 transmission 90 100 ( ? ) vop % v ? driving voltage(v) brightness curve of non-selected segment brightness a 0 vop ??? b brightness curve of selected segment (%) ??? note3 c ontrast ratio brightness in off static b contrast ratop = brightness in on static a v iewing a ngle ? direction a ngl e =180 o o =90 o =270 =0 o y x y x =270 o o =180 =90 o o =0 6:00 12:00 3:00 9:00 9:00 12:00 3:00 6:00 3 4 2 1 free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 10 / 20 11 . reliability of lcd module item test condition time high temperature operating 7 0 72 hours low temperature operating -20 72 hours high temperature storage 8 0 72 hours low temperature storage - 3 0 72 hours temperature C humidity storage 40 90%r.h. 96 hours temperature cycling -20 to 25 to 7 0 to 25 (30min/30min/30min30min) 10 cycle vibration test at lcm level freq 10-55hz,sweep rate:10-55-10 at 1 min, sweep mode linear displacement: 1.5 mm p-p 1 hour each for x,y,z 30 minutes fpc of lcd bending test t ry 20 times for bending fpc along the lcd as the bending radius is at least 0.5mm. criteria of judgment 1 all of the segments shall not be blurred; 2 all segments shall be usually displayed; judgment shall be made after exposure in room temperature condition for 2 hours; free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 11 / 20 12 . ac characteristics free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 12 / 20 13. commands table free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 13 / 20 free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 14 / 20 14. lcd moudle quality standard 14 14 14 14 .1 .1 .1 .1 inspection level sampling procedure: general inspection levels and single sampling plans for normal inspection of iso2859. item item item item indication indication indication indication aql aql aql aql major nonconformity ma function 0.4 size minor nonconformity mi effects on lcd appearance but not on function 1.0 14 14 14 14 .2 .2 .2 .2 inspection condition: 1 1 1 1 4.2 4.2 4.2 4.2 .1 .1 .1 .1 the inspection should be done under 40w fluorescent light and visual inspection distance is 30cm. 1 1 1 1 4.2 4.2 4.2 4.2 .2 .2 .2 .2 back-lights or reflective boards should be adopted for inspecting transmissive lcds. 1 1 1 1 4.2 4.2 4.2 4.2 .3 .3 .3 .3 the visual direction should be viewing angle range 1 1 1 1 4.2 4.2 4.2 4.2 .4 .4 .4 .4 this kind of situation will be judged qualificatory one that defection of product in b area won t effect customer s assembly and product quality 1 1 1 1 4 4 4 4 .3 .3 .3 .3 definition of application zone: a zone:display area view b zone:non-display area of the lcd c zone:i/f area & backlight area 1 1 1 1 4 4 4 4 .4 .4 .4 .4 lcd lcd lcd lcd appearance appearance appearance appearance standard: standard: standard: standard: no no no no item item item item specifications specifications specifications specifications application application application application zone zone zone zone a a a a b b b b c c c c 1 glass chipping there should not be noticeable defect - 2 black spots/lines dappled color black spots <0.15mm disregard 0.3mm Q n=0 0.15 Q <0.3 n=3 :average diameter - - black lines (1) w Q 0.02mm disregard (2) l Q 3mm w Q 0.03mm (3) l Q 2.5mm w Q 0.05mm (2)+(3) Q 4pcs (4) w>0.05mm refer to the round specification - - dappled color there should not be distinct dappled color - - 3 contrast spots Q 0.2mm disregard 0.2mm< Q 1.0mm n Q 1 1.0mm< n=0 :average diameter - - 4 polarizer bubbles Q 0.2mm disregard 0.3mm< Q 0.5mm n Q 1 0.2mm< Q 0.3mm n= 2 :average diameter - - peeling the polarizer should not peel - - scratches there should not be distinct scratch - - protective film bubbles are acceptable - l c d free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 15 / 20 5 lcd pattern display pattern there should not be distinct deformation in each segment character or dot on visual inspection - - deformation(proje ction notch or pinhole) w pattern width in the spec sheet a Q 0.2 and a Q (1/3)w b Q 0.2 and a Q (1/2)w c:pattern should not touch to the adjacent dots. (d+e)/2 Q 0.2 f Q 0.25 g1 Q 0.15 and g1 Q (1/3)w g2 Q 0.15 and g2 Q (1/2)w |h-j| Q 0.25 (x+y)/2 Q 0.2 maximum quantity of defects(deformation notch and pinhole) less than 1 per dot less than 1 per segment less than 5 per lcd more than half of the area of each dot should be remained defects smaller then 0.1 shall be disregarded open short there should not be open or short - 6 surface of the lcd dust stains or defects round <0.3mm disregard 0.3mm Q n=0 :average diameter filamentous 1)w Q 0.02mm diameter 2)l Q 2.5mm w Q 0.03mm 3)l Q 1.5mm w Q 0.5mm 2)+3) Q 6pcs 4)w>0.05mm refer to the round specification dust that can be blown away by airblow and stains that can be wiped off lightly by cloth shall be disregarded - - free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 16 / 20 1 1 1 1 4 4 4 4 .5 .5 .5 .5 pcb/cob pcb/cob pcb/cob pcb/cob appearance appearance appearance appearance standard: standard: standard: standard: 1 pcb deformity l h Q 6.0mm Q 1.5mm accept 6.0mm Q 1.5mm reject min 6.0mm 1.5mm reject min 6.0mm 1.5mm reject min 2 deformity at pcb edge,damage circuit reject maj 3 convex at pcb edge l h Q 6.0mm Q 1.5mm accept min 6.0mm Q 1.5mm reject min 6.0mm 1.5mm reject min 6.0mm 1.5mm reject min 4 damage excess 2x2mm at the pcb corner reject min 5 scratch on pcb surface see sample min 6 scratch on pcb coat/leakage coat on pcb surface reject maj 7 open circuit reject maj 8 pcb pth open reject maj 9 repair pcb pth qty Q 2pcs accept qty R 3pcs reject maj 10 color different from one side to another side reject min 11 repaired solder mask area Q 30m O accept R 30m O reject min 12 scratch circuit,damage circuit a Q 1/2w or b model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 17 / 20 l w not defined see sample - w Q 0.15 l Q 3 w Q 0.20 2 l Q 2 w Q 0.3 2 - w>0.3 side accept qty l w see sample - w Q 0.2 except l Q 3 w Q 0.25 2 l Q 2 w Q 0.3 2 9 twist angle accept 10 void gap between bezel and pcb reject min 11 bezel clip incorrectly ng reject min 1 1 1 1 4 4 4 4 .7 .7 .7 .7 sodler sodler sodler sodler appearance appearance appearance appearance standard standard standard standard 1 wrong component reject maj 2 broken component reject maj 3 mis alignment component legs extend beyond the legs>pad distance(w)on solder area>w 2 accept component legs extend beyond the pad and legs>pad distance(w) on solder area>w 2 reject min component offset solder legs offset distance l model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 18 / 20 1 1 1 1 4 4 4 4 .8 .8 .8 .8 cable cable cable cable dimensions dimensions dimensions dimensions and and and and backlight backlight backlight backlight appearance appearance appearance appearance standard standard standard standard no no no no item item item item specifications specifications specifications specifications application application application application zone zone zone zone a a a a b b b b c c c c 1 i/f cable open short there should not be open or short - - scratches there should not be noticeable defect - - peeling the reinforcement should not peel off the i/f cable - - sharp bending there should not be sharp bending part - - 2 dimensions outline dimensions display area refer to drawing of outline dinesion 3 backlight dust stains or scratches there should not be noticeable defect (when you see a product side from a display surface it is in the shape of the standard of a point filamentous contrast spots) dust that can be blown away by airblow and stains that can by airblow and stains that can be wiped off lightly by cloth shall be disregarded. - - 10 solder pad tilt up but height (h)less than solder pad thickness (a) solder pad thickness (a) accept 11 excess solder above components reject min 12 insufficient solder below components or less than diameter reject min 13 solder area less than soldering pad area by 2/3 reject min 14 trimmed pin length beyond 0.09inch(2.3mm) reject min free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 19 / 20 1 1 1 1 5 5 5 5 . . . . handling handling handling handling precautions precautions precautions precautions 1 1 1 1 5 5 5 5 .1 .1 .1 .1 caution caution caution caution of of of of lcd lcd lcd lcd handling handling handling handling & & & & cleaning cleaning cleaning cleaning use soft cloth with solvent (recommended below) to clean isopropyl alcohol, ethyl alcohol, trichlorotriflorothane do not wipe the display surface with dry or hard materials that will damage the polarizer surface. do not use the following solvent : -water, ketone , aromatics 1 1 1 1 5 5 5 5 . . . . 2 2 2 2 caution caution caution caution aainst aainst aainst aainst static static static static charge charge charge charge the lcd modules use cmos lsi drivers, so customers are recommend that any unused input terminal would be connected to vdd or vss , do not input any signals before power is turned on, and ground yourbody ,work/assembly areas, assembly equipment to protect against static electricity. remove the protective film slowly and, if possible, under esd control device like ion blower and humidity of working room should be kept over 50%rh to reduce risk of static charge. 1 1 1 1 5 5 5 5 .3 .3 .3 .3 packaging packaging packaging packaging avoid intense shock and falls from a height and do not operate or store them exposed direct to sunshine or high temperature/humidity. 1 1 1 1 5 5 5 5 .4 .4 .4 .4 caution caution caution caution for for for for operation operation operation operation it is an indispensable condition to drive lcd s within the specified voltage limit since the higher voltage than the limit causes the shorter lcd life. the use of direct current drive should be avoided because an electrochemical action due to direct current causes lcd s undesirable deterioration.response time will be extremely delayed at low perature, and lcd s show dark color at high temperature. however those phenomena do not mean malfunction or out of order with lcd s. some font will be abnormally displayed when the display area is pushed hard during operation. but it resumes normal condition after turning off once. 1 1 1 1 5 5 5 5 .5 .5 .5 .5 safety safety safety safety for crash damaged or unnecessary lcd s, it is recommended to wash off liquid crystal by either of solvents such as acetone and ethanol and should be burned up later.when any liquid leaked out of a damaged glass cell comes in contact with your hands, wash it off with soap and wate free datasheet http:/// model model model model no. no. no. no. standard standard standard standard doc doc doc doc gs- g g 12864 63ffwj /r product spec. genda genda genda genda technology technology technology technology (shenzhen) (shenzhen) (shenzhen) (shenzhen) ltd. ltd. ltd. ltd. page: 20 / 20 16 16 16 16 . . . . packing packing packing packing specifications specifications specifications specifications a. put lcm into package b. then put 1pcs soft-thing. d. put the c into the long cardboard. c. every group between bubble flakes bubble flakes e put d into the carton box free datasheet http:/// |
Price & Availability of GG1286463FFWR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |